Miscellaneous Output Configuration Register (Index=208, RB='1')

Miscellaneous Output Configuration Register

Index=0xD0, Byte 0. Index=0xF8 Word 0. RB='1'.

D7	D6	D5	D4	D3	D2	D1	D0
CTOUT2PE	CTOUT2SEL1	CTOUT2SEL1	CTOUT2SEL0	CTOUT0PE	CTOUT0SEL1	CTOUT0SEL1	CTOUT0SEL0

Index=0xD0, Byte 1. Index=0xD1 Word 0. RB='1'.

D15	D14	D13	D12	D11	D10	D9	D8
X	X	X	X	X	X	X	X

Bit Definitions

NAME	DIRECTION	DEFAULT	DESCRIPTION
CTOUT2PE	rw	0	CT_OUT2 (J7.2) pulse extender 0 = disabled (default) 1 = enabled, extend selected signal by 100nSec approximately.
CTOUT2SEL[1:0]	rw	000	CT_OUT2 (J7.2) source select 000 = 8254 CT2 output (default) 001 = Digital Output, DOUT5. Reference Digital Outputs Register. 010 = Analog Input ADC-sample / ADC-Burst sample pulse 011 = Active ADC Sampling 100 = Analog Input Frame Timer 101 = Interrupt Counter Increment 110 = zero 111 = IOCHRDY
CTOUT0PE	rw	0	CT_OUT0 (J7.3) pulse extender 0 = disabled (default) 1 = enabled, extend selected signal by 100nSec approximately.
CTOUT0SEL[1:0]	rw	000	CT_OUT0 (J7.3) source select 000 = 8254 CT0 output (default) 001 = Digital Output, DOUT4. Reference Digital Outputs Register. 010 = Trigger delay end pulse 011 = Trigger delay start pulse 100 = Interrupt Threshold Counter maximum reached 101 = Active ADC Sampling 110 = ADC Data MSB address decode 111 = Interrupt

Description

This register is used to configure the CT_OUT2 (J7.2) and the CT_OUT0 (J7.3) outputs. In other words, these outputs are now generalized and various signals can be routed to these outputs.