You are here: Register Set > General Configuration (Index=0, RB='1')
|
STX104 Reference Manual
|
   |
   |
General Configuration (Index=0, RB='1')
|
STX104 Reference Manual
|
|
|
General Configuration Register
Index=0x00, Byte 0. RB='1'.
|
D7 |
D6 |
D5 |
D4 |
D3 |
D2 |
D1 |
D0 |
|
AIID |
CLK |
DMAJ |
M4J |
M3J |
M2J |
M1J |
M0J |
|
NAME |
DIRECTION |
DEFAULT |
DESCRIPTION |
|
AIID |
rw |
0 |
Auto Index Increment Disable. Index register is automatically incremented by the size (byte/word) of the data that is read or written. 0 = Auto index increment enabled (default) 1 = Auto index increment disabled |
|
CLKJ |
r |
J6.1MHZ jumper |
Mode jumper 1MHZ state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
DMAJ |
r |
J6.DMA jumper |
Mode jumper DMA state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
M4J |
r |
J6.M4 jumper |
Mode jumper M4 state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
M3J |
r |
J6.M3 jumper |
Mode jumper M3 state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
M2J |
r |
J6.M2 jumper |
Mode jumper M2 state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
M1J |
r |
J6.M1 jumper |
Mode jumper M1 state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
M0J |
r |
J6.M0 jumper |
Mode jumper M0 state at connector J6. 0 = Jumper is not installed 1 = Jumper is installed |
|
Copyright © 1997-2008 by Apex Embedded Systems. All rights reserved. Updated on Wednesday, April 02, 2008.
|
|
What do you think about this topic? Send feedback!
|
Description