You are here: Analog Outputs > Calibration
STX104 Reference Manual
ContentsIndexHome
PreviousUpNext
Calibration

 

 

Hardware configuration:

  1. Select the desired output range by adjusting jumper settings at J5.
  2. Install jumper M2 as required for the application (this jumper selects 16-bit versus 12-bit resolution).

 

Calibration of DAC Channel-A:

  1. Write 65535 (0xFFFF) to Register DAC Channel-A.
  2. Adjust potentiometer DA1_G (R2) until the desired full scale is reached.

 

Calibration of DAC Channel-B:

  1. Write 65535 (0xFFFF) to Register DAC Channel-B.
  2. Adjust potentiometer DA2_G (R1) until the desired full scale is reached.
Copyright © 1997-2008 by Apex Embedded Systems. All rights reserved. Updated on Wednesday, April 02, 2008.
What do you think about this topic? Send feedback!