Hardware configuration:

1. Select the desired output range by adjusting jumper settings at J5.
2. Install jumper M2 as required for the application (this jumper selects 16-bit versus 12-bit resolution).

Calibration of DAC Channel-A:

1. Write 65535 (0xFFFF) to Register DAC Channel-A.
2. Adjust potentiometer DA1_G (R2) until the desired full scale is reached.

Calibration of DAC Channel-B:

1. Write 65535 (0xFFFF) to Register DAC Channel-B.
2. Adjust potentiometer DA2_G (R1) until the desired full scale is reached.

Analog Outputs